6927A CWH3 Hanger for Aluminium Frames 50 Pieces


SKU: LION-6927A Category:


6927A CWH3 Hanger for Aluminium Frames 50 Pieces

CWH3 Hanger – suitable for most aluminium frame profiles

Fits easily into the channel of most double-plate aluminium frame profiles. Adjusted with two screws.

All our CWH Hangers are switching to an on-trend silver nickel finish. This move away from a yellow zinc finish reflects the fact that sales of silver finish frame hardware now outstrip the more traditional brass. This change will happen as stock rotates.

Fit CWH3 Hangers in 4 simple steps: 

1)  Slot 2 CWH Hangers into the aluminium frame. Position and mark approximately 1/3 of the way down from the top. Put one screw in an oval hole of each hanger.

2) Position and fix the hooks, place two Post-its in approximate hook positions. Check and mark hook positions on Post-its. Hold hook in position on mark. Use a light hammer to insert pins.

3) Hang frame in place on the hooks and check for general position. To adjust for level, use screw in a slot. To lock CWH Hangers in position, insert second screw in each.

4) Frames will hang flat and level on the wall – do not tip forward.

CWH3 Hangers, pack of 50 pieces

Also available in packs of 200 pieces and 600 pieces.

Safe working load, based on our tests: 11kg (when used in pairs)

Screws in CWH3 Square Sawtooth Hangers

Screws included in this pack are sometimes slotted and sometimes cross headed. If slotted use a well-fitting flat bladed screwdriver. If cross-headed use a PH-2 screwdriver head.

More Info:

PUB007 Face Mounting Prints onto Clear Acrylic

How to: Use a sub-frame system for hanging flat panel graphics

PUB004 Stretching Inkjet Prints on Canvas

PUB036 CWH Hangers

The name, style, concept and detail of all CWH Hangers are parts of an original idea which is © 2009 LION PFS Ltd. All rights reserved.

Load Testing

We have an in-house purpose-built load testing rig so you can be more certain of the safe load carrying capacity of any frame hardware from Lion.

SWL – Red handle icon giving a tested safe load figure which is derived from actual test results on our rig. Typically between 25% and 33% of the load at failure.

ESWL – White handle icon shows an estimated safe load figure based on our experience and best judgement.